Carpet Area Calculator for Flats

Flats in India have been sold by "super built-up area", which includes walls, balconies and a share of lobbies and lifts. The space you actually live in, the carpet area, can be a quarter to a third smaller. Since RERA, builders must state carpet area, but comparing offers still takes some arithmetic.

Measure each room inside the walls and this calculator adds up the carpet area in sq ft and m². Enter the builder's super area and rate to see the loading and the real price per square foot of usable space.

Carpet, built-up and super built-up area

Under RERA, carpet area is the net usable floor area inside the external walls, including internal partition walls but excluding external walls, service shafts and exclusive balconies or terraces. Built-up area adds the walls and balconies. Super built-up area adds a share of common areas such as lobbies, staircases, lifts and clubhouses.

Loading = (super area − carpet area) ÷ carpet area × 100. Loading of 25 to 40% is common.

The real price per square foot

A rate quoted on super area hides the cost of the space you can use. Dividing the total price by the carpet area shows what each usable square foot really costs, which makes flats with different loading easy to compare. Measuring rooms inside the walls slightly under-counts carpet area, because internal walls are excluded, so the result errs on the cautious side.

How to use this tool

  1. Measure each room inside the walls: Length and width in feet, including kitchen and bathrooms.
  2. Leave out balconies: They are not part of carpet area.
  3. Enter the builder's super area: Optional, to see the loading.
  4. Enter the rate per sq ft: Optional, to see the real price per sq ft of carpet area.

Features

Worked examples

A 1BHK

Living room 15 × 12 ft, bedroom 12 × 11 ft, kitchen 10 × 8 ft.

180 + 132 + 80 = 392 sq ft (36.42 m²)

Result: Carpet area of 392 sq ft.

Checking the builder's offer

The same flat is sold as 600 sq ft super area at ₹8,000 per sq ft.

Loading = (600 − 392) ÷ 392 = 53.1%; price ₹48,00,000 ÷ 392

Result: You pay about ₹12,245 per sq ft of usable space, not ₹8,000.

Who it is for

Tips

Frequently asked questions

What is a normal loading percentage?

Many projects have 25 to 40% loading. Projects with large amenities can be higher. Higher loading means less usable space for the price.

Is carpet area the same as RERA carpet area?

This calculator follows the RERA idea of usable area inside the walls. The builder's RERA figure also includes internal walls, so it may be a little higher than your room measurements.

Should I include balconies?

No. Balconies and terraces are listed separately from carpet area under RERA.

Related tools