Carpet Area vs Built-up Area vs Super Built-up Area

Flat advertisements in India quote areas that sound similar but mean very different things. A "1,000 sq ft" flat may give you only 700 sq ft of floor to live on. The gap is in the walls, balconies and a share of lobbies, lifts and clubhouses that the builder adds to the figure.

This guide explains the three areas, what RERA changed, how loading is calculated, and how to compare two flats fairly by the price you pay for each square foot you can actually use.

The three areas

The percentage by which super area exceeds carpet area is called loading. Loading of 25 to 40% is common, and projects with big amenities can go higher.

What RERA changed

The Real Estate (Regulation and Development) Act, 2016 requires builders of registered projects to sell flats on the basis of carpet area and to state it in the agreement. Many advertisements still mention super area and a rate on it, so buyers should ask for the RERA carpet area in writing and check the project's registration on the state RERA website.

Comparing flats on usable space

Two flats at ₹8,000 per sq ft of super area can cost very different amounts per usable square foot if their loading differs. Divide the total price by the carpet area to get the real rate. It is the fairest single number for comparing projects, alongside location, quality and amenities.

Step by step

  1. Get the RERA carpet area: From the agreement, the builder or the RERA website.
  2. Or measure the rooms yourself: Inside the walls, in feet, including kitchen and bathrooms.
  3. Enter the super area and rate: In the Carpet Area Calculator.
  4. Read loading and real price: Compare flats on price per sq ft of carpet area.

Key points

Examples

A 1BHK quoted at 600 sq ft

Rooms measure 15 × 12, 12 × 11 and 10 × 8 ft; the builder quotes 600 sq ft super area at ₹8,000 per sq ft.

Carpet area 180 + 132 + 80 = 392 sq ft; loading (600 − 392) ÷ 392 = 53.1%; ₹48,00,000 ÷ 392

Result: You pay about ₹12,245 per usable square foot, not ₹8,000.

Two flats with the same advertised rate

Flat A has 25% loading, flat B 40%, both at ₹8,000 per sq ft of super area.

Real rate = ₹8,000 × (1 + loading): A ≈ ₹10,000, B ≈ ₹11,200

Result: Flat B costs about 12% more for each usable square foot.

Who it is for

Tips

Frequently asked questions

Which area should the price be based on?

Under RERA, flats in registered projects must be sold on carpet area. Compare offers by the total price divided by carpet area.

What is a normal loading factor?

Often 25 to 40%. Higher loading means less usable space for the same advertised area.

Is a balcony part of carpet area?

No. Under RERA, exclusive balconies and terraces are listed separately from carpet area.

Related pages